610W 12BB Half Cell Mono PERC 210mm Solar Panel

• Excellent Cells Efficiency

MBB technology reduce the distance between busbars and finger grid line which is benefit to power increase.

• Anti PID

Ensured PID resistance through the quality control of cell manufacturing process and raw materials.

• Better Weak Illumination Response

More power output in weak light condition, such as haze, cloudy, and early morning.

• Adapt To Harsh Outdoor Environment

Resistant to harsh environments such as salt, ammonia, sand, high temperature and high humidity environment.

• Excellent Quality Managerment System

Warranted reliability and stringent quality assurances well beyond certified requirements.

Technology

The PERC cell has a passivated rear side and a laser grooving process, which significantly improves the cell efficiency.
	Half-cut cell is to cut the cell into two seperate parts by mature infrared laser, hence halve the working current. The thermal loss on the ribbon will be remarkably reduced and the module's power increases. The reliability of module is also enhanced.The combination of half-cut cell technology and bifacial module can amplify the gain over the effect of current-reduction.

Materials

12%  Ultra Clear Tempered Glass.	Higher Efficiency, 9BB Cells	120N Tensile Strength Frame

120N Tensile Strength Frame	4mm² Qualified cable with MC4	High Transmittance EVA

Electrical Specification

Certifications

• ISO 9001: 2015: ISO Quality Management System
• ISO 14001: 2015: ISO Environment Management System
• ISO 45001: 2018: Occupational Health and Safety
• CE & EU declaration of conformity
• IEC 61215 / IEC 61730 Anti-PID Test for Photovoltaic Module
• IEC 61701 Salt Mist Corrosion Test for Photovoltaic Module
• IEC 60068-2-68 Dust and Sand Test for Photovoltaic Module
• UL1703 / UL 61730 – PV Module Safety Standards

Features

• Up to 610W front power and 21.55% module efficiency with half-cut and MBB (Multi Busbar) technology bringing more BOS savings
• Lower resistance of half-cut and good reflection effect of MBB ensure high power
• Proven to be reliable in high temperature and humidity areas
• Better anti-shading performance and lower operating temperature
• Smart module packaging solutions are used to achieve high reliability, low-cost transportation and logistics.
• Gallium-doped technology overcomes LID degradation and guarantees the long-term power generation of the module.
• Uniform smart soldering increases the power and efficiency of the module, and improves the power load capacity.